Southern Meter Box — Full Product Catalog

These double stack boxes are designed for cold weather regions where meters are to be set deeper into the ground to prevent freezing. They will consist of two bodies stacked on top of each other. The top body will be either 12” or 15” in depth with no rat hole. The bottom section will also be 12” or 15” in depth but will be fixed with a rat hole for the service line.

Box Styles:

Most C.H. Series boxes can be double stacked to accommodate the design need of the engineer. The box specifications will be exactly as the series of box chosen, with the exception of the overall depth, which will be the sum of the two depths.

Lid Styles:

The lid styles will be the same as those available to the series box chosen.

Solid Cast Iron Lid with a Cast Iron Reader

Design use:  Fits in 66 (17x 30) Series Meter Boxes.

A solid one-piece concrete cover with reinforced wire frame.

Design Use: For a standard use in C.H. 5/8” x 3/4” Box or 36 Series.

Solid Cast Iron Lid w/2" Offset T.R. Hole

Design Use:  Fits C.H. 5/8" x 3/4" Box or 36 Series.  For use in touch read or automatic meter reading (AMR) applications.  Item is rated for Tier 15 loads.

Solid Cast Iron Lid marked either "WATER" OR "SEWER"

Design Use: Fits C.H. 5/8” x 3/4” Box or 36 Series. For heavy traffic use.

Solid Cast Iron Lid with Lock

Design Use: Fits C.H. 5/8” x 3/4” Box

Solid Cast Iron Lid w/2” T.R. Hole

Design Use: Fits C.H. 5/8” x 3/4” Box or 36 Series. For use in touch read or automatic meter reading (AMR) applications.

Light Weight Cast Iron Lid w/Cast Iron Reader

Design Use: Fits C.H. 5/8” x 3/4” Box or 36 Series.  For use in light to medium traffic areas.  It is rated for Tier 15 or lower loads.

Cast Iron Lid w/Cast Iron Reader

Design Use: Fits C.H. 5/8” x 3/4” Box or 36 Series.

Cast Iron Lid that fits over the top edges of the meter box w/Cast Iron Reader in Center

Design Use: Fits C.H. 5/8” x 3/4” Box or 36 Series as well as similar size plastic boxes.  Design to help reinforce the collar of the box.

Cast Iron Lid with reader and offset 2" AMR Hole

Design Use:  Fits C.H. 5/8" x 3/4" Box or 36 Series as well as 10" x 15" Plastic and Polymer Lids.  For use in touch read or automatic reading (AMR) applications.

Concrete Lid w/Cast Iron Reader

Design Use: Fits C.H. 3/4” Box or 33 Series

All concrete covers reinforced by wire frame above pin.

Provides adequate space for housing either a 5/8" X 3/4" meter and shut-off or a 3/4" meter and shut-off (compatible to the 36 Series). The meter can be removed and repaired without disturbing the meter box. This box has a wider collar at top which gives it additional strength as well as more positive bearing in the soil or sidewalk to keep the box at grade. Box should be mounted at grade for proper performance.  All boxes are made of lightweight aggregate, cement and sand for easier handling and maximum strength. The box is rated to handle a Tier 15 or lower loads.  This box has a skid resistant top.

Cast Iron Lid w/Cast Iron Reader

Design Use: Fits C.H. 3/4” Box or 33 Series. For heavy traffic use.

Provides adequate space for either a 5/8" X 3/4" or 1" meter. The meter can be removed and repaired without disturbing the box. All boxes are made of lightweight aggregate, cement and sand for easier handling and maximum strength. This box has a skid resistant top.  Similar to the 33 Series Box

Concrete Lid w/Cast Iron Reader

Design Use: Fits C.H. 5/8” x 3/4” Box or 36 Series

All concrete covers reinforced by wire frame above pin.

Concrete Lid w/Locking Cast Iron Reader

Design Use: Fits C.H. 5/8” x 3/4” Box or 36 Series. Used for locking purposes.

All concrete covers reinforced by wire frame above pin.

Solid Cast Iron Lid with Recess and 2" T.R. Hole

Design Use:  Fits C.H. 5/8" x 3/4" Box or 36 Series as well as 10" x 15" Plastic Boxes.  For use in touch read or automatic meter reading (AMR) applications.

Solid Cast Iron Lid w/2” T.R. Hole

Design Use: Fits C.H. 1” Box or 37 Series. For use in touch read or radio read applications.

Is designed to house 1" meter and shut-off. The meter can be removed and repaired without disturbing the meter box. All boxes are made of lightweight aggregate, cement, and sand for easier handling and maximum strength.  Box is designed to handle Tier 15 or lower load requirements.  Dimensions are similar to the 37 Series. 

Cast Iron Lid w/Cast Iron Reader

Design Use: Fits C.H. 1” Box or 37 Series. For heavy traffic use.

Concrete Lid w/Cast Iron Reader

Design Use: Fits C.H. 1” Box or 37 Series.

All concrete cover reinforced by wire frame above pin.

Solid Cast Iron Lid marked either "WATER" OR "SEWER"

Design Use: Fits C.H. 1” Box or 37 Series.  For heavy traffic areas.

Used for housing a 1 1/2” water meter (compatible to the 38 Series). The meter can be removed and repaired without disturbing the meter box. All boxes are made of lightweight aggregate, cement, and sand for easier handling and maximum strength.  Meter should be installed at grade for proper performance.

Cast Iron Lid with Dual Cast Iron Reader

Design Use: Fits C.H. 1 1/2” Box or 38 Series

This box was designed for the City of Birmingham Water Works Board. It can accommodate from a 5/8” x 3/4” to a 1 1/2” meter. The meter can be removed and repaired without disturbing the box. The box is constructed of lightweight aggregate, cement, and sand for easier handling and maximum strength.

Cast Iron Lid w/Cast Iron Reader

Design Use: Fits C.H.-B Box. For heavy traffic use.

Cast Iron Dual Reader

Design Use: Fits all Dual Lids

Cast Iron Reader w/a pair of 2” Holes

Design Use: Fits all Dual Lids. For Dual Touch Read Meters.

Solid Cast Iron Lid

Design Use: Fits C.H. Dual Box or 12 Series. For heavy traffic use.

Solid Cast Iron Lid

Design Use: Fits C.H. Dual Box or 12 Series. For heavy traffic use.

Cast Iron Lid w/Cast Iron Reader

Design Use: Fits C.H. Dual Box or 12 Series. For heavy traffic use.

Solid cast iron lid with 2 - 2" diameter holes for either a touch read or radio read system.  This lid is designed to fit a dual (12 Series) box.  

Accommodates a side-by-side installation of two 5/8" X 3/4 meters and shut-offs. This means two houses can be serviced with only one tapping of the main and only one service line from the main to the meter box. All boxes are made of lightweight aggregate, cement, and sand for easier handling and maximum strength. This box has a skid resistant top.

Solid oval concrete box with a C.I. ring cast into the top of the box. This box is designed for use in clean-out, but can be used for other means.

For housing 2” meter and shut-off (compatible to the 65 Series). The meter can be removed and repaired without disturbing the meter box. All boxes are made of lightweight aggregate, cement, and sand for easier handling and maximum strength. The box is designed to handle a Tier 15 or lower load requirement.  This box has a skid resistant top.

Concrete Lid w/Cast Iron Reader

Design Use: Fits C.H. 2” Box or 65 Series

All concrete covers reinforced by wire frame above pin.

Solid 2-Piece Cast Iron Lid

Design Use: Fits C.H. 2” Box or 65 Series. For use in heavy traffic areas.

Solid 2-Piece Cast Iron Lid w/2” T.R. Hole

Design Use: Fits C.H. 2” Box or 65 Series. For use in touch read or radio read applications. This lid allows for one or both sides to be affixed with T.R. System.

Cast Iron Lid w/Cast Iron Reader

Design Use: Fits C.H. 2” Box or 65 Series. For heavy traffic use.

Solid cast iron lid with a 2" hole for either radio read or touch read.  Lid is designed to fit in a 2 inch (65 Series) box.  

Cast Iron Reader

Design Use: Fits all Standard Reader Lids

Cast Iron Reader w/2” Hole

Design Use: Fits all Lids w/Standard Reader. For use with Single Pad Touch Read System

The Round Valve Box Pad is designed to protect the valve box without the hassle of forming and pouring a pad in the field.  The 24” diameter valve box pad is made of concrete (Type I cement) and is reinforced using 9 gauge wire with an option of #3 rebar (available upon request). It is 4” in deep with a taper down to 2”. The top of the pad has a hole with a diameter of 10” and the hole is tapered through the pad giving it a final bottom diameter of 9 1/2”.  The 24" diameter 6" deep pad in no longer available.

The C.H. 16” Solid Square Pad, also known as a pre-cast concrete trust block, was designed to provide a foundation for valves when placed in the ground, but could have many other uses.  The 16” Square Valve Box Pad is made of lightweight aggregate, cement and sand for easier handling and maximum strength.  It is reinforced with 9 gauge wire.  The pad has a depth of 4”.

Sewer Cleanout Pads​The 24” x 24” x 4” Pad is made of concrete (Type I cement) with two layers of 9 gauge wire reinforcement. The top of the pad has a 12 1/16” circular recess 3/4” deep which allows the cleanout ring and cover to fit flush with the pad. The remaining 3 1/4” deep hole through the center of the pad is 9 1/4” in diameter which allows for adequate connection from below.

The C.H. 16” Square Valve Box Pad is designed to fit and protect around the top of the valve box.  It eliminates the time consuming process of forming and pouring in the field.  The 16” Square Valve Box Pad is made of lightweight aggregate, cement and sand for easier handling and maximum strength.  It is reinforced with 9 gauge wire.  The pad has a depth of 4”.  The pad has a 9 1/2” diameter hole in the center of the pad.

The AJ-4 Locking Device is designed to deter tampering with meter valves.  It is made of a corrosion resistant material (cast aluminum) with a 3/16” proof chain affixed.  The chain will accommodate either a barrel lock or padlock.  It is available in either ¾” or 1”.  American made product.

AJ-4 3/4” Lock

AJ-4 1” Lock

The AJ-1 Locking Device is designed to deter tampering with meter valves.  It is made of a corrosion resistant material (cast aluminum).  It has an adjustable slide for an easy fit.  It can accommodate either a barrel lock or padlock.  It is designed to fit a 3/4" service.  American made product.

The AJ FHL1 is a simple design hydrant lock to deter unauthorized individuals from tampering with the operating nut on a fire hydrant. The locking device is constructed to accommodate either a conventional or barrel lock, which will allow a system to remain uniform. The FHL1 works simply by securing the cover to the operating nut device with a pin. This will allow the cover to rotate freely around the operating nut device so that the operating nut can’t be engaged. American made product.

Designed to read meters through muddy or discolored water. Let water filled meter pits become a problem of the past with the meter sight scope. Made of transparent materials to let light inside and down to the water meter. Scopes affixed with a chain for easy carry.  THE 3" SCOPE IS NOW AVAILABLE WITH MAGNIFING LENS!!

Meter glass must be wiped free of mud or other obstructions prior to use. The use of a flashlight alongside of the meter scope may be required with murky water or insufficient outside light.  

3" Diameter Scopes - 3"x18", 3"x24", 3"x36", 3"x48"

2" Diameter Scopes - 2"x18", 2"x24", 2"x36", 2"x48"

Insert Stiffeners: Inserts are designed to reinforce 3/4” CTS (copper tube size) and 1” CTS polyethylene tubing. They are available in either plastic or stainless steel and are flared on the end for a flush fit.

3/4” C.T.S. Insert

1” C.T.S. Insert

Insert Stiffeners: Inserts are designed to reinforce 3/4” CTS (copper tube size) and 1” CTS polyethylene tubing. They are available in either plastic or stainless steel and are flared on the end for a flush fit.

Quantities:  100/bag ¾”

                     50/bag 1”

The meter box has straight sides for easy installation.  It is made of High Density Polyethylene Plastic (HDPE) and combined with he appropriate lid meets all the standards of the H20 Load Test.  It is designed to accommodate a variety of lids to meet the application standard including HDPE and Cast Iron.  These lids can also be equipped to meet any AMR/AMI System.

The meter box has straight sides for easy installation.  It is made of High Density Polyethylene Plastic (HDPE) and combined with the appropriate lid meets all the standards of the H20 loading.  It is designed to accommodate a variety of lids to meet the application standard including HDPE and Cast Iron.  These lids can be equipped to meet any AMR/AMI system.  

The meter box has straight sides for easy installation.  It is made of High Density Polyethylene Plastic (HDPE) and combined with the appropriate lid meets all the standards of the H20 Load Test.  It is designed to accommodate a variety of lids to meet the application standard including HDPE, Polymer Concrete and Cast Iron.  These lids can also be equipped to meet any AMR/AMI or Touch Read System.

The meter box has straight sides for easy installation.  It is made of High Density Polyethylene Plastic (HDPE) and combined witht the appropriate lid meets all the standards of the H20 Load Test.  It is designed to accomodate a variety of lids to meet the application standard including HDPE, Polymer Concrete and Cast Iron.  These lids can also be equipped to meet any AMR/AMI System.  

The meter box has straight sides for easy installation.  It is made of High Density Polyethylene Plastic (HDPE) and combined with the appropriate lid meets all the standards of the H20 Load Test.  It is designed to accommodate a variety of lids to meet the application standard including HDPE and Cast Iron.  These lids can also be equipped to meet any AMR/AMI System.  The 1416 may be set up to accommodate either one or two (Dual) meters.

The meter box has straight sides for easy installation.  It is made of High Density Polyethylene Plastic (HDPE) and combined with the appropriate lid meets all the standards of the H20 Load Test.  It is designed to accommodate a variety of lids to meet the application standard including HDPE and Cast Iron.  These lids can also be equipped to meet any AMR/AMI System.  The dimensions are shown in inches and (metric).

This is a heavy duty polymer lid.  It is designed with a diamond top, pick hole and reader door for easy access.  It is made of non floating materials and has a mount through for AMR/AMI devices.  The top of the lid can be configured with different markings as well as a city logo.  This product is Made in the USA.  

The 2737 Grade Ring is designed to make adjusting manholes easy.  The Grade Ring is composed of light weight polymer concrete and designed to meet AASHTO H20 Specifications.

The P.H. 1 1/2” meter box is designed to house water meters from 5/8”x3/4” to 2”.  The meter can be removed and repaired without disturbing the meter box.  The box has a woven reinforced to provide additional strength.  It has strait side walls which allows for easier installation than most other boxes.  The box is also affixed with prefabricated pipe holes (rat holes) so there is no cutting or knocks outs to deal with in the field.  All polymer boxes are composed of a polyester resin and aggregate fillers.  They have a 1” foot at the bottom for additional stability in the ground.  Proper installation of meter boxes would include a base of either gravel or rock. This box meets H20 specifications. Made in the USA.

The  2434 Grade Ring is designed to make adjusting manholes easy.  The Grade Ring is composed of light weight polymer concrete and designed to meet AASHTO H20 Specifications.  

The P.H. 1” meter box is designed to house a water meter and shut-off for meters from 5/8”x3/4” to 1” in size.  The meter can be removed and repaired without disturbing the meter box.  The box has a woven reinforcement to provide additional strength.  It has strait side walls which allows for easier installation than most other boxes.  The box is also affixed with prefabricated pipe holes (rat holes) so there is no cutting or knocks outs to deal with in the field.  All polymer boxes are made using a mixture of polyester resin and aggregate fillers.  They have a 1” foot at the bottom to provide additional stability in the ground.  Proper installation of meter boxes would include a base of either gravel or rock.  This box meets H20 specifications.  Made in the USA.

This is a heavy duty polymer lid.  It is designed with a diamond top, magnet for locating and pick hole for easy removal.  It is made with non floating materials and has multiple mounting options for AMR/AMI devices.  The top of the lid can be configured with different markings (Water Meter, Sewer, etc) and be set up with a city logo.  This product is Made in the USA.

This is a heavy duty polymer lid.  It is designed with a diamond top, magnet for locating and pick hole for easy removal.  It is made with non floating materals and has a mount through for AMR/AMI devices.  The top of the lid can be configured with different markings as well as a city logo.  This product is Made in the USA.

This is a heavy duty polymer lid.  It is designed with a diamond top, magnet for locating and pick hole for easy removal.  It is made with non floating materials and has multiple mounting options for AMR/AMI devices.  The top of the lid can be configured with different markings (Water Meter, Sewer, etc.) and be set up with a city logo.  This product is Made in the USA.

This is a heavy duty polymer lid.  It is designed with a diamond top, magnet for locating, and pick hole for easy removal.  It is made with non floating materials and has a mount through for AMR/AMI devices.  The top of the lid can be configured with different markings as well as a city logo.  This product is Made in the USA.

This is a heavy duty polymer lid.  It is designed with a diamond top, pick hole and reader lid for easy access.  It is made with non floating materials and has multiple mounting options for AMR/AMI devices.  The top can be configured with different markings as well as a city logo.  This product is Made in the USA.